Payment & Shipping Terms:
|Size:||600*540*300CM||Color:||Customization Is Acceptable|
|Production Time:||10-15 Working Days After 50% Deposit Received||Warranty Period:||1 Year|
plastic play structure with slide,
plastic outdoor toys
All plastic not easy to lose color outdoor playground for display with simple construction TQ-QS015
Daily cleaning and maintenance is essential if the amusement equipment is to extend its service life and ensure safety and hygiene. So, do you know how to clean and maintain your play equipment? Below, we will organize the analysis of the maintenance skills of the inventory equipment, let's take a look!
First, if it is indoor activity room, floor, wall, etc., it needs daily ultraviolet radiation disinfection, and the room should be ventilated frequently. Disinfect once a week with hydrogen peroxide spray.
Second, when the circuit electrical part is cleaned, first of all, it must be ensured that the power is cut off, and the watering is prohibited. Generally, it is scrubbed with a damp cloth. After the device is completely dry, connect the power supply.
Third, if the metal part is going to rust, you can use a brush to remove the rust and wipe it with a dry cloth; after exposure to the sun, you can buy a colorless self-spraying paint, and spray it again and again at a distance of 20 cm. After drying, spray again to protect the body. After the paint is completely dry, it is washed, dried and disinfected.
4. The soft sponge part can be scrubbed with a soft cloth dampened with soapy water or placed in the sun for exposure and disinfection.
Amusement equipment cleaning and maintenance tips Eight strokes clean without leaving a dead end
5. All amusement equipment, such as open-air slides and drill cylinders, should not have accumulated water after rain. If there is accumulated water, a small hole with a diameter of about 4 mm should be used at the lowest point for drainage.
Sixth, the moisture-resistant, heat-resistant, non-fading wooden part can be washed with soapy water and dried, then sprayed with 84 disinfectant.
7. Plastic parts and glass fiber can be diluted with soapy water, disinfecting washing powder, bleaching powder, etc., then wiped with a soft cloth or soft brush, rinsed with water, dried with a cleaning cloth or dried. Finally, spray disinfection with 84 disinfectant.
8. Of course, at the same time, it is necessary to check whether the connection part is firm, the metal is frequently connected, the fuel is added, and the circuit electrical appliances and ordinary parts are damaged.
|Safety Area (mm)||900*840cm(L*W)|
|Modules||Roofs, slides, plastic panels, stairs, decks, tubes and posts, climbing.|
|Material||A. Plastic parts: Imported LLDPE|
|B. Post: National standard galvanized steel pipe|
|C. Metals: Galvanized|
|D. Deck, stair, bridge: Steel with plastic covered|
|E. Fasteners: 304 stainless|
|(Different material is available at your demand. )|
|e.Color is not easy to fade|
|Installation||2 day (2 persons)|
|Falling Height (mm)||2200|
|Age Range||3--12 age|
|Apply to||Amusement park, kindergarten, preschool, residential area.|
|Packing||Standard export packing|
|Plastic parts: Bubble bag and pp film;|
|Iron parts: Cotton and pp film|
|Use Life||7-10 years|
|Remark||1.Please check the screws and other catchers regularly to assure the firm structure.|
|2.Please make sure that all the kids play with adult supervision.|
|3.Blunt objects and acid corrosive liquor are forbidden.|
Contact Person: Lisa